The SDA50X60-H is a type of thin cylinder produced by SMC. Here are its main parameters:
1. Basic Dimensions
- Bore Diameter: 50mm
- Stroke Length: 60mm
- Overall Length: Approximately 210mm
- Mounting Dimensions: M12×1.25 (Threaded holes for mounting)
2. Performance Parameters
- Working Pressure Range: 0.15MPa~1.0MPa
- Maximum Operating Pressure: 1.5MPa
- Operating Temperature Range: -10°C~60°C (Standard type)
- Speed Range: 50mm/s~500mm/s
- Cushioning Method: Built-in adjustable cushioning
- Port Size: Rc1/4
3. Special Features
- -H: Represents the cylinder with a stroke adjustment mechanism, allowing fine-tuning of the stroke length
- Compact Design: Smaller than standard cylinders, suitable for applications with limited space
- High Rigidity: Despite its thin structure, it has good lateral load resistance
4. Mounting Options
- Standard Mounting: Includes foot mounting, flange mounting, and rod-end mounting
- Optional Accessories: Magnetic switches can be installed for position detection
5. Sealing System
- Sealing Material: NBR (Standard) or FKM (High-temperature resistant)
- Double-Acting: Air pressure is used for both extension and retraction strokes
6. Notes for Use
- Air Quality: Requires clean, dry compressed air (filtered to 40μm or less)
- Lubrication: Oil-free operation is possible, but lubrication can extend service life
- Installation: Avoid installing in environments with dust, corrosive gases, or direct sunlight
This cylinder is widely used in automation equipment, packaging machinery, and industrial robots due to its compact size and high performance.
Post time: Jun-13-2025